Description: This tutorial explains how to import WC3 animations into D2 without the use of a 3D program.
Categories: Tutorials (1.1x) - Graphic and Sound Files
I discovered a method to get the animations from a Warcraft III Unit
WITHOUT using any 3D Program. This method is quite work-intensive but
for me it is easier to get the animations on this way than one another.
I posted on this method (my elf plugin) quite long ago and somebody
asked me if i couldn't make a tutorial how i achieved it. So here it
First of all you need a running version of the WorldEditor of Warcraft
Then you need some other programs:
Gamani Gif Movie Gear www.moviegear.com
Hypercam V.2.10.02 www.hyperionics.com
Palette Express 1.6 www.risoftsystems.com
D2 Palette for PSP (there are three palettes in the starterkit)
We want to get the necessary animations to put a Warcraft III Unit into
D2. My method contains various parts. We have to do one after the
The theory of my method:
1.)We use the WorldEditor of Warcraft III to view the unit we would
like to get the animations from.
2.) Choose the animation of the mode you want to get!
3.) We record one direction of the chosen animation using Hypercam.
a) We adjust the recorded direction and make first applying settings to
the D2 palette using GAMANI.
b.) We export the animation into individual images using GAMANI.
5.) We apply the d2 palette to each exported image using Palette
a) We import all these images into an animation using GAMANI.
b) We will make some finally corrections to the animation using Gamani
and we have finished our Work for one direction of the chosen
7.) Repeat the steps 3-6) for each direction of the chosen mode
animation (remember a d2 monster has eight directions per mode
8.) Put the eight different directions together to one animation in the
right way using Gamani and save this animation.
9.) Go to step 2) and choose the next animation we need.
10.) The GetHit and the Corpse Mode Animation
11.) Finished with mode animations
Now let's go into detail:
1.) Open your Warcraft III WorldEditor. Be sure that you set high
details and quality ('File/Preferences/Grafic'). Use the
Toolpalette/Unitpalette to choose a unit. This method has problems to
record units with special light effects like an aura under their feets.
Please take a unit without such effect. This unit will appear in the
grey window on the left side of the program. Over the window you can
change the animation of the unit and below the distance and the
direction! Change the height and the width of this window to change
this attributes of the unit. You can also increase or decrease the
distance to zoom out or to zoom in. The unit's size should not be
bigger than it should become in Diablo2.
2.) Now choose the animation you want to get. We need at last the
ONE Attack Mode Animation
ONE Death Mode Animation
ONE Stand Mode Animation
ONE Walk Mode Animation
Animations like Attack2, Spell are optional.
3.) We want to record one direction of the chosen mode animation. The
first direction i would suggest would be the front direction (270
Degrees). Experienced Modders could also follow the Animation guide for
monster taking first the unit facing the down-left corner of the window
(225 Degrees). Open Hypercam. Set 'Avi-File/Video Compressor = Full
Frames (Uncompressed' and 'Frame Compression Quality = 100' for the
best quality. Deselect 'Other Options/Record Cursor' to avoid problems.
We have to set the region we want to record. Select 'Screen Area/select
Region' and adjust the region (a rectangle) of the grey window you want
to record. The region's height and width should be as little as
possible without removing parts of the unit during the record. But you
have to take into account that the unregisterd version of Hypercam adds
a 16-pixel high banner on the top of your animation. So you have to
make the rectangle a bit higher as it would be necessary. Look at the
unit's animation and then select the region using Hypercam. Before you
record the first direction you could change 'Avi-File/Frame rate per
second' to a higher value to get a fluent animation. But be careful
adjusting this value could create a non-fluent animation because your
system is not good enough. After you have recorded the first direction
neither change the unit's size nor the frame rate! Be sure to have
adjusted the unit'size in a proper way. If the unit is bigger the
chance increases that you get problems recording the direction. Now
record the direction and check if all parts of the unit are inside the
blinking rectangle during the record. You should stop the record after
the unit repeated it's animation twice.
4.)a) Open the recorded .avi File with Gamani Movie Gear. Check if all
parts of the unit are there during the whole animation. If for example
the 'Unregisterd Hypercam 2' Banner has cut away the head of your unit
you have to adjust the region to record new (step 3) and then you have
to go on to step 4a). If the animation is good crop the banner and
delete unnecessary frames in the animation until you have one fluent
animation (and no twice repeating animation only once). Therefor play
the animation, delete frames, play it again until it is fluent
especially the iteration of the animation! If you work on the second
till eight direction you have to be sure to have the same number of
frames your first saved direction had. So if your first direction had a
fluent animation with iteration with 24 frames all the other directions
for the same animation mode must have 24 frames! Select 'ANIMATION/EDIT
GLOBAL PALETTE' and set the Background color to '170,170,170'. If the
top left color of the palette is '0,0,0' or '1,1,1' or similar set it
to '5,5,1'!Save the animation with the name of the mode and the
b) Select 'FILE/Export AS/INDIVIDUAL GIF IMAGES' and export your
animation into a subdirectory splitted up into one image per frame.
5) Open Palette Express. Select 'Palette/Load Palette' to load your D2
Palette (i think i used the one for PSP 7). Then mark the first five
exported images ('Input') and select the directory for the output
('Output'). Be sure to set 'Dither method = Nearest Color' to avoid
changes in the palette of the images. Now apply the palette to the
first five images and after that apply the palette to the next five and
repeat this procedure until all exported images are applied to the D2
Palette (you only have to follow this split up into five images per run
when you use the non-bought shareware version like me).
6)a) Open Gamani Movie Gear. Select 'File/Insert Frames' and mark all
exported images applied to the d2 palette in the step before.
b) Finally Corrections of the animation:
b1)Select 'FRAME/global properties' and set the background transparent
and select 'Background Color before drawing next picture'
b3)Set 'FRAME/GLOBAL PROPERTIES' and set the background to
b4)Select 'Animation/Optimize' and deselect 'Shrink Frames to smallest
b5)Save this animation '*Mode*_*direction*_with_palette' where you have
to replace *Mode* and *direction* with the Mode and the direction you
7) Now you have to do steps 3)-6) for each direction of the chosen
8) If you have the eight directions open Gamani. Select 'File/Insert
Frames' and choose the directions in the following order: unit facing
down- left corner, unit facing down-right corner, unit facing
upper-right corner, unit facing upper- left corner, unit's front, unit
facing right side, unit's back, unit facing left side. You have to
deselect a frame after you Inserted an animation otherwise the program
inserts the frames before the selected one and not after the inserted
direction! After you have done this you could check the frame number
(which should be a possible multiplier of eight like 32,40,48 and so
on). Save the complete mode animation file and be sure you find it
;-)!This is one of the mode animation we will get into d2.
9) Choose the next mode animation we need. If there is an animation
that looks like a knock-back effect (GetHit Mode) you could do the
steps 3)-6) for that mode animation too and after that jump to step 11)
10) If there is no knock-back like animation you could also use the
first 6-8 frames of the death mode animation (saved in part 9) of each
direction and put them together to save it as the new gethit mode
animation. For the corpse mode animation you have to open the death
mode animation (saved in part 9) and delete all frames except the last
of each direction and save it as the new corpse mode animation. Be sure
that you haven't deleted now your death mode animation!
11) Read the Animation Tutorial and get the mode animations into d2 to
get your Warcraft III Unit into D2!
This method is like i said really work-intensive but until i found a 3D
Program that really shows the models of WC3 and not meshes in a 2D
area i will use it. You can also use this method for NWN Models with
Aurora Neverwinter Nights Model Viewer instead of the WorldEditor. But
the models have no death/corpse and gethit animation which is no
problem for summoned creatures but for other monsters.
This is the first version of the tutorial, i will add further
explanations if it is necessary. Please ask if there are any problems understanding this tutorial.
Link to this article: Select all
[url=https://d2mods.info/forum/kb/viewarticle?a=307&sid=725c442eca1fb7b561a6cf4066aca2ee]Knowledge Base - Warcraft III Units in D2 (by SBM)[/url]