Cannot start the mod (1.14) 5.0.3
Moderator: Xaphan
-
- Posts: 3
- Joined: Sat Jun 11, 2016 2:16 am
Cannot start the mod (1.14) 5.0.3
The mod won't open at all. Nothing happens.
5.0.3 version.
Tried every video settings, windowed mode... And when I press d2vidtest an error happens. Could not locate d2se_setup.ini
On diablo 1.14 too. I've read that the mod was supporting ''any'' versions, am I correct?
Just freshly reinstalled diablo and everything. (note that I MUST install a glide wrapper to open diablo without the infamous ACCESS VIOLATION.
New to this mod and forum, sorry if it's been answered or anything, I have difficulty to navigate and find stuff overhere
5.0.3 version.
Tried every video settings, windowed mode... And when I press d2vidtest an error happens. Could not locate d2se_setup.ini
On diablo 1.14 too. I've read that the mod was supporting ''any'' versions, am I correct?
Just freshly reinstalled diablo and everything. (note that I MUST install a glide wrapper to open diablo without the infamous ACCESS VIOLATION.
New to this mod and forum, sorry if it's been answered or anything, I have difficulty to navigate and find stuff overhere
-
- Paladin
- Posts: 172
- Joined: Fri Jan 03, 2014 1:20 am
- Location: the black abyss
Re: Cannot start the mod (1.14) 5.0.3
your better off downgrading your diablo to 1.10 up to 1.13c 1.14 casues more problems than it's worth imo. and do you have d2se installed on your pc?
-
- Posts: 11
- Joined: Sat Apr 02, 2016 12:00 pm
Re: Cannot start the mod (1.14) 5.0.3
If i remember it's a 1.10 Mod so u have to use 1.10.
Downloading 1.14 and downgrade doesn't work so u have to install it from CD's and upgrade it to the version or download an older battle.net client with version 1.13d or lower.
Also d2se is the best choice you can go with, but u can't install it on 1.14x either.
Downloading 1.14 and downgrade doesn't work so u have to install it from CD's and upgrade it to the version or download an older battle.net client with version 1.13d or lower.
Also d2se is the best choice you can go with, but u can't install it on 1.14x either.
-
- Posts: 3
- Joined: Sat Jun 11, 2016 2:16 am
Re: Cannot start the mod (1.14) 5.0.3
Tried reinstalling diablo using the cd, manually updated to 1.10. Still the problem. I open the mod VIA d2se and then nothing happens.
UPDATE : Finally managed to get it open by putting D2SE in windows 7 compability mode.
UPDATE : Finally managed to get it open by putting D2SE in windows 7 compability mode.
-
- Posts: 11
- Joined: Sat Apr 02, 2016 12:00 pm
Re: Cannot start the mod (1.14) 5.0.3
If u using D2SE install 1.13C - D2SE will downgrade the game to 1.10 if needed (but u also can play other mods which use an other version then 1.10.
Re: Cannot start the mod (1.14) 5.0.3
The mod run on 1.10 but with D2SE it work on any version because D2SE do the job, but I duno if D2SE is compatible with 1.14.
But it look like you solved your issue so all good
But it look like you solved your issue so all good
-
- Posts: 1
- Joined: Sat Jul 23, 2016 3:17 am
Re: Cannot start the mod (1.14) 5.0.3
im having the same issue, can someone walk me through the steps on how to fix the issue?
-
- Warrior
- Posts: 10
- Joined: Wed Nov 16, 2016 3:45 pm
Re: Cannot start the mod (1.14) 5.0.3
Set d2se to windows 7 compatibility mode - helped me too
Re: Cannot start the mod (1.14) 5.0.3
Tests revealed that D2SE is not compatible with version 1.14, so that mean the mod is not as well. Only way to fix it, for now, is to have an istall that is every other version but 1.14.
Re: Cannot start the mod (1.14) 5.0.3
@Xaphan: This is not entirely true. D2SE works perfectly on a 1.14 installation IF diablo was NOT installed with the new 1.14 digitial download installers. If you install the game with your cds or the old 1.12 digital download installers and patch diablo to 1.14 (either via battle.net or manual) D2Se works fine (with the correct compatibility options of course: WinXP SP3 + deactivate scaling on high dpi).
I haven't tested LRoO though as I have never played it
PS: you can download the old installers here: https://mega.nz/#F!VIth1DKQ!Q42bVsCGQZ4UhoGjqvHxGw
I haven't tested LRoO though as I have never played it
PS: you can download the old installers here: https://mega.nz/#F!VIth1DKQ!Q42bVsCGQZ4UhoGjqvHxGw
Re: Cannot start the mod (1.14) 5.0.3
D2SE doesn't support 1.14. So using 1.14 can and will end in random crashes sometimes. If mods use Plugins like D2Mod (for 1.10) they can't get read at some point and the game will crash.
To have a clean install, D2SE needs to be installed over 1.13c. Seltsamuel is working on 1.14x at the moment, so hopefully there will be a release for 1.14x in near future.
To have a clean install, D2SE needs to be installed over 1.13c. Seltsamuel is working on 1.14x at the moment, so hopefully there will be a release for 1.14x in near future.
Re: Cannot start the mod (1.14) 5.0.3
It is absolutely irrelevant on which version of diablo D2SE was installed (with the exception of the new installers as I mentioned earlier).
When you create a D2SE plugin for a mod you choose with which base patch the mod should be started. When launching the plugin D2SE starts exactly this base patch version with the mod files on top of it. For LRoO it should be 1.10f as D2ModSystem is used if I understood it correctly.
The update Seltsamuel is working on will bring support for mods BASED on 1.14 not the ability to start mods based on other patches on a 1.14 installation.
The only thing that forces you to install D2SE on a specific diablo version is a topic we're not allowed to talk about here. If this is the case you should patch diablo (doesn't matter if you do it before or after installing D2SE) to the patch the mod is based on as the system we're not allowed to talk about will probably run the same patch version and check for it. This is a bug the D2SE update will fix too so that the base patch of the mod will be checked for compatibility and not the version of your diablo installation
When you create a D2SE plugin for a mod you choose with which base patch the mod should be started. When launching the plugin D2SE starts exactly this base patch version with the mod files on top of it. For LRoO it should be 1.10f as D2ModSystem is used if I understood it correctly.
The update Seltsamuel is working on will bring support for mods BASED on 1.14 not the ability to start mods based on other patches on a 1.14 installation.
The only thing that forces you to install D2SE on a specific diablo version is a topic we're not allowed to talk about here. If this is the case you should patch diablo (doesn't matter if you do it before or after installing D2SE) to the patch the mod is based on as the system we're not allowed to talk about will probably run the same patch version and check for it. This is a bug the D2SE update will fix too so that the base patch of the mod will be checked for compatibility and not the version of your diablo installation
Re: Cannot start the mod (1.14) 5.0.3
i cant start the game too, d2 13.3c with the mod public beta, also tried reinstall, change display, every video settings or others window compability mode neither. Please help me.
-
- Champion of the Light
- Posts: 300
- Joined: Sat Oct 31, 2009 12:28 pm
- Location: China
Re: Cannot start the mod (1.14) 5.0.3
Installed D2SE? Does D2SE work? Do other mods work? If its a D2SE problem you might wanna ask in the Snej Fourm for help.
Cheers
AlphA
Cheers
AlphA
Re: Cannot start the mod (1.14) 5.0.3
Oh well, i've found down that changing the window compability of D2SE into window 7, it will work normally. Thanks anyway.
Re: Cannot start the mod (1.14) 5.0.3
Glad it goes sorted out